Neodymium PTFE Spray Coated Disc Magnet - 1 in. dia x 3/16 in. thick x 1/4 in. hole - 13.23lbs Pull (South)
*Measurements have been rounded to the nearest fraction inch - please check the product description for specific measurements.*
High-performance countersunk Neodymium (N42) magnet with the south polarity on the countersunk face. Spray coated with PTFE for high corrosion resistance.
Pack quantity 10: 10 Magnets
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product:
- 25mm diameter x 5mm thick with a 6.5mm diameter countersunk hole for fixing.
- 0.98 in. diameter x 0.19 in. thick with a 0.25 in. diameter countersunk hole for fixing.
- +/-0.1mm (0.004 in.) tolerance.
- Each magnet has its south pole on the countersunk face.
- Each magnet can support 6kg (13.23lbs) pull vertically from the magnetic face when in flush contact with a mild steel surface.
- PTFE spray coating to increase friction and prevent marking other contact surfaces.
- Can be fixed in place with our 6mm (0.25 in.) diameter countersunk screws.
Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE spray coating, they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect.
What's Popular